uboot: (firmwareOdroidC2/C4) don't invoke patch tool, use patches = [] instead

https://github.com/NixOS/nixpkgs/blob/master/pkgs/stdenv/generic/setup.sh#L948 this can do it nicely. Signed-off-by: Anton Arapov <anton@deadbeef.mx>
2021-04-03 12:58:10 +02:00 · 2021-04-03 12:58:10 +02:00 · 56de2bcd43
commit 56de2bcd43
30691 changed files with 3076956 additions and 0 deletions
--- a/nixos/modules/profiles/all-hardware.nix
+++ b/nixos/modules/profiles/all-hardware.nix
@ -0,0 +1,123 @@
+# This module enables all hardware supported by NixOS: i.e., all
+# firmware is included, and all devices from which one may boot are
+# enabled in the initrd.  Its primary use is in the NixOS installation
+# CDs.
+
+{ pkgs, lib,... }:
+let
+  platform = pkgs.stdenv.hostPlatform;
+in
+{
+
+  # The initrd has to contain any module that might be necessary for
+  # supporting the most important parts of HW like drives.
+  boot.initrd.availableKernelModules =
+    [ # SATA/PATA support.
+      "ahci"
+
+      "ata_piix"
+
+      "sata_inic162x" "sata_nv" "sata_promise" "sata_qstor"
+      "sata_sil" "sata_sil24" "sata_sis" "sata_svw" "sata_sx4"
+      "sata_uli" "sata_via" "sata_vsc"
+
+      "pata_ali" "pata_amd" "pata_artop" "pata_atiixp" "pata_efar"
+      "pata_hpt366" "pata_hpt37x" "pata_hpt3x2n" "pata_hpt3x3"
+      "pata_it8213" "pata_it821x" "pata_jmicron" "pata_marvell"
+      "pata_mpiix" "pata_netcell" "pata_ns87410" "pata_oldpiix"
+      "pata_pcmcia" "pata_pdc2027x" "pata_qdi" "pata_rz1000"
+      "pata_serverworks" "pata_sil680" "pata_sis"
+      "pata_sl82c105" "pata_triflex" "pata_via"
+      "pata_winbond"
+
+      # SCSI support (incomplete).
+      "3w-9xxx" "3w-xxxx" "aic79xx" "aic7xxx" "arcmsr"
+
+      # USB support, especially for booting from USB CD-ROM
+      # drives.
+      "uas"
+
+      # SD cards.
+      "sdhci_pci"
+
+      # NVMe drives
+      "nvme"
+
+      # Firewire support.  Not tested.
+      "ohci1394" "sbp2"
+
+      # Virtio (QEMU, KVM etc.) support.
+      "virtio_net" "virtio_pci" "virtio_mmio" "virtio_blk" "virtio_scsi" "virtio_balloon" "virtio_console"
+
+      # VMware support.
+      "mptspi" "vmxnet3" "vsock"
+    ] ++ lib.optional platform.isx86 "vmw_balloon"
+    ++ lib.optionals (pkgs.stdenv.isi686 || pkgs.stdenv.isx86_64) [
+      "vmw_vmci" "vmwgfx" "vmw_vsock_vmci_transport"
+
+      # Hyper-V support.
+      "hv_storvsc"
+    ] ++ lib.optionals (pkgs.stdenv.isAarch32 || pkgs.stdenv.isAarch64) [
+      # Most of the following falls into two categories:
+      #  - early KMS / early display
+      #  - early storage (e.g. USB) support
+
+      # Allows using framebuffer configured by the initial boot firmware
+      "simplefb"
+
+      # Allwinner support
+
+      # Required for early KMS
+      "sun4i-drm"
+      "sun8i-mixer" # Audio, but required for kms
+
+      # PWM for the backlight
+      "pwm-sun4i"
+
+      # Broadcom
+
+      "vc4"
+    ] ++ lib.optionals pkgs.stdenv.isAarch64 [
+      # Most of the following falls into two categories:
+      #  - early KMS / early display
+      #  - early storage (e.g. USB) support
+
+      # Broadcom
+
+      "pcie-brcmstb"
+
+      # Rockchip
+      "dw-hdmi"
+      "dw-mipi-dsi"
+      "rockchipdrm"
+      "rockchip-rga"
+      "phy-rockchip-pcie"
+      "pcie-rockchip-host"
+
+      # Misc. uncategorized hardware
+
+      # Used for some platform's integrated displays
+      "panel-simple"
+      "pwm-bl"
+
+      # Power supply drivers, some platforms need them for USB
+      "axp20x-ac-power"
+      "axp20x-battery"
+      "pinctrl-axp209"
+      "mp8859"
+
+      # USB drivers
+      "xhci-pci-renesas"
+
+      # Misc "weak" dependencies
+      "analogix-dp"
+      "analogix-anx6345" # For DP or eDP (e.g. integrated display)
+    ];
+
+  # Include lots of firmware.
+  hardware.enableRedistributableFirmware = true;
+
+  imports =
+    [ ../hardware/network/zydas-zd1211.nix ];
+
+}