uboot: (firmwareOdroidC2/C4) don't invoke patch tool, use patches = [] instead

https://github.com/NixOS/nixpkgs/blob/master/pkgs/stdenv/generic/setup.sh#L948 this can do it nicely. Signed-off-by: Anton Arapov <anton@deadbeef.mx>
2021-04-03 12:58:10 +02:00 · 2021-04-03 12:58:10 +02:00 · 56de2bcd43
commit 56de2bcd43
30691 changed files with 3076956 additions and 0 deletions
--- a/nixos/modules/system/boot/initrd-network.nix
+++ b/nixos/modules/system/boot/initrd-network.nix
@ -0,0 +1,148 @@
+{ config, lib, pkgs, ... }:
+
+with lib;
+
+let
+
+  cfg = config.boot.initrd.network;
+
+  dhcpInterfaces = lib.attrNames (lib.filterAttrs (iface: v: v.useDHCP == true) (config.networking.interfaces or {}));
+  doDhcp = config.networking.useDHCP || dhcpInterfaces != [];
+  dhcpIfShellExpr = if config.networking.useDHCP
+                      then "$(ls /sys/class/net/ | grep -v ^lo$)"
+                      else lib.concatMapStringsSep " " lib.escapeShellArg dhcpInterfaces;
+
+  udhcpcScript = pkgs.writeScript "udhcp-script"
+    ''
+      #! /bin/sh
+      if [ "$1" = bound ]; then
+        ip address add "$ip/$mask" dev "$interface"
+        if [ -n "$mtu" ]; then
+          ip link set mtu "$mtu" dev "$interface"
+        fi
+        if [ -n "$staticroutes" ]; then
+          echo "$staticroutes" \
+            | sed -r "s@(\S+) (\S+)@ ip route add \"\1\" via \"\2\" dev \"$interface\" ; @g" \
+            | sed -r "s@ via \"0\.0\.0\.0\"@@g" \
+            | /bin/sh
+        fi
+        if [ -n "$router" ]; then
+          ip route add "$router" dev "$interface" # just in case if "$router" is not within "$ip/$mask" (e.g. Hetzner Cloud)
+          ip route add default via "$router" dev "$interface"
+        fi
+        if [ -n "$dns" ]; then
+          rm -f /etc/resolv.conf
+          for server in $dns; do
+            echo "nameserver $server" >> /etc/resolv.conf
+          done
+        fi
+      fi
+    '';
+
+  udhcpcArgs = toString cfg.udhcpc.extraArgs;
+
+in
+
+{
+
+  options = {
+
+    boot.initrd.network.enable = mkOption {
+      type = types.bool;
+      default = false;
+      description = ''
+        Add network connectivity support to initrd. The network may be
+        configured using the <literal>ip</literal> kernel parameter,
+        as described in <link
+        xlink:href="https://www.kernel.org/doc/Documentation/filesystems/nfs/nfsroot.txt">the
+        kernel documentation</link>.  Otherwise, if
+        <option>networking.useDHCP</option> is enabled, an IP address
+        is acquired using DHCP.
+
+        You should add the module(s) required for your network card to
+        boot.initrd.availableKernelModules.
+        <literal>lspci -v | grep -iA8 'network\|ethernet'</literal>
+        will tell you which.
+      '';
+    };
+
+    boot.initrd.network.flushBeforeStage2 = mkOption {
+      type = types.bool;
+      default = true;
+      description = ''
+        Whether to clear the configuration of the interfaces that were set up in
+        the initrd right before stage 2 takes over. Stage 2 will do the regular network
+        configuration based on the NixOS networking options.
+      '';
+    };
+
+    boot.initrd.network.udhcpc.extraArgs = mkOption {
+      default = [];
+      type = types.listOf types.str;
+      description = ''
+        Additional command-line arguments passed verbatim to udhcpc if
+        <option>boot.initrd.network.enable</option> and <option>networking.useDHCP</option>
+        are enabled.
+      '';
+    };
+
+    boot.initrd.network.postCommands = mkOption {
+      default = "";
+      type = types.lines;
+      description = ''
+        Shell commands to be executed after stage 1 of the
+        boot has initialised the network.
+      '';
+    };
+
+
+  };
+
+  config = mkIf cfg.enable {
+
+    boot.initrd.kernelModules = [ "af_packet" ];
+
+    boot.initrd.extraUtilsCommands = ''
+      copy_bin_and_libs ${pkgs.klibc}/lib/klibc/bin.static/ipconfig
+    '';
+
+    boot.initrd.preLVMCommands = mkBefore (
+      # Search for interface definitions in command line.
+      ''
+        ifaces=""
+        for o in $(cat /proc/cmdline); do
+          case $o in
+            ip=*)
+              ipconfig $o && ifaces="$ifaces $(echo $o | cut -d: -f6)"
+              ;;
+          esac
+        done
+      ''
+
+      # Otherwise, use DHCP.
+      + optionalString doDhcp ''
+        # Bring up all interfaces.
+        for iface in ${dhcpIfShellExpr}; do
+          echo "bringing up network interface $iface..."
+          ip link set "$iface" up && ifaces="$ifaces $iface"
+        done
+
+        # Acquire DHCP leases.
+        for iface in ${dhcpIfShellExpr}; do
+          echo "acquiring IP address via DHCP on $iface..."
+          udhcpc --quit --now -i $iface -O staticroutes --script ${udhcpcScript} ${udhcpcArgs}
+        done
+      ''
+
+      + cfg.postCommands);
+
+    boot.initrd.postMountCommands = mkIf cfg.flushBeforeStage2 ''
+      for iface in $ifaces; do
+        ip address flush "$iface"
+        ip link set "$iface" down
+      done
+    '';
+
+  };
+
+}