uboot: (firmwareOdroidC2/C4) don't invoke patch tool, use patches = [] instead

https://github.com/NixOS/nixpkgs/blob/master/pkgs/stdenv/generic/setup.sh#L948
this can do it nicely.

Signed-off-by: Anton Arapov <anton@deadbeef.mx>

nixos/tests/containers-macvlans.nix

@@ -0,0 +1,82 @@
+let
+  # containers IP on VLAN 1
+  containerIp1 = "192.168.1.253";
+  containerIp2 = "192.168.1.254";
+in
+
+import ./make-test-python.nix ({ pkgs, lib, ... }: {
+  name = "containers-macvlans";
+  meta = {
+    maintainers = with lib.maintainers; [ montag451 ];
+  };
+
+  nodes = {
+
+    machine1 =
+      { lib, ... }:
+      {
+        virtualisation.vlans = [ 1 ];
+
+        # To be able to ping containers from the host, it is necessary
+        # to create a macvlan on the host on the VLAN 1 network.
+        networking.macvlans.mv-eth1-host = {
+          interface = "eth1";
+          mode = "bridge";
+        };
+        networking.interfaces.eth1.ipv4.addresses = lib.mkForce [];
+        networking.interfaces.mv-eth1-host = {
+          ipv4.addresses = [ { address = "192.168.1.1"; prefixLength = 24; } ];
+        };
+
+        containers.test1 = {
+          autoStart = true;
+          macvlans = [ "eth1" ];
+
+          config = {
+            networking.interfaces.mv-eth1 = {
+              ipv4.addresses = [ { address = containerIp1; prefixLength = 24; } ];
+            };
+          };
+        };
+
+        containers.test2 = {
+          autoStart = true;
+          macvlans = [ "eth1" ];
+
+          config = {
+            networking.interfaces.mv-eth1 = {
+              ipv4.addresses = [ { address = containerIp2; prefixLength = 24; } ];
+            };
+          };
+        };
+      };
+
+    machine2 =
+      { ... }:
+      {
+        virtualisation.vlans = [ 1 ];
+      };
+
+  };
+
+  testScript = ''
+    start_all()
+    machine1.wait_for_unit("default.target")
+    machine2.wait_for_unit("default.target")
+
+    with subtest(
+        "Ping between containers to check that macvlans are created in bridge mode"
+    ):
+        machine1.succeed("nixos-container run test1 -- ping -n -c 1 ${containerIp2}")
+
+    with subtest("Ping containers from the host (machine1)"):
+        machine1.succeed("ping -n -c 1 ${containerIp1}")
+        machine1.succeed("ping -n -c 1 ${containerIp2}")
+
+    with subtest(
+        "Ping containers from the second machine to check that containers are reachable from the outside"
+    ):
+        machine2.succeed("ping -n -c 1 ${containerIp1}")
+        machine2.succeed("ping -n -c 1 ${containerIp2}")
+  '';
+})