uboot: (firmwareOdroidC2/C4) don't invoke patch tool, use patches = [] instead

https://github.com/NixOS/nixpkgs/blob/master/pkgs/stdenv/generic/setup.sh#L948
this can do it nicely.

Signed-off-by: Anton Arapov <anton@deadbeef.mx>

pkgs/development/compilers/ghdl/simple-tb.vhd

@@ -0,0 +1,78 @@
+library ieee;
+use IEEE.STD_LOGIC_1164.all;
+use ieee.numeric_std.all;
+
+library STD;
+use STD.textio.all;
+
+entity tb is
+end tb;
+
+architecture beh of tb is
+
+component simple
+port (
+    CLK, RESET : in std_ulogic;
+    DATA_OUT : out std_ulogic_vector(7 downto 0);
+    DONE_OUT : out std_ulogic
+);
+end component;
+
+signal data : std_ulogic_vector(7 downto 0) := "00100000";
+signal clk : std_ulogic;
+signal RESET : std_ulogic := '0';
+signal done : std_ulogic := '0';
+signal cyclecount : integer := 0;
+
+constant cycle_time_c : time := 200 ms;
+constant maxcycles : integer := 100;
+
+begin
+
+simple1 : simple
+port map (
+    CLK => clk,
+    RESET => RESET,
+    DATA_OUT => data,
+    DONE_OUT => done
+);
+
+clk_process : process
+begin
+    clk <= '0';
+    wait for cycle_time_c/2;
+    clk <= '1';
+    wait for cycle_time_c/2;
+end process;
+
+count_process : process(CLK)
+begin
+    if (CLK'event and CLK ='1') then
+    if (RESET = '1') then
+        cyclecount <= 0;
+    else
+        cyclecount <= cyclecount + 1;
+    end if;
+    end if;
+end process;
+
+test : process
+
+begin
+
+RESET <= '1';
+wait until (clk'event and clk='1');
+wait until (clk'event and clk='1');
+RESET <= '0';
+wait until (clk'event and clk='1');
+for cyclecnt in 1 to maxcycles loop
+    exit when done = '1';
+    wait until (clk'event and clk='1');
+    report integer'image(to_integer(unsigned(data)));
+end loop;
+wait until (clk'event and clk='1');
+
+report "All tests passed." severity NOTE;
+wait;
+end process;
+end beh;